Update Junkie the network sniffer v-2.2.0

Release Notes v-2.2.0 : Faster deadlock detection. Can replay pcaps in a loop. Can now pass nettrack values to a guile action. More documentation (in doc/). Support for multi-line HTTP headers. Guile files are pre-compiled before installation (see ./configure –help)


Junkie is a real-time packet sniffer and analyzer. It is modular enough to accomplish many different tasks. It can be a helpful companion to the modern network administrator and analyst. Compared to previously available tools, junkie lies in between tcpdump and wireshark. Unlike tcpdump, its purpose is to parse protocols of any depth; unlike wireshark, though, it is designed to analyze traffic in real-time and so cannot parse traffic as completely as wireshark does. In addition, its design encompasses extendability and speed. It has a plug-in system and high-level extension language that eases the development and combination of new functionalities; threaded packet capture and analysis for handling of high bandwidth networks; and a modular architecture to ease the addition of any protocol layer. It is based on libpcap for portability, and well-tested on professional settings.
Download : https://github.com/securactive/junkie/zipball/release/2.2.0
Read more right here : https://github.com/securactive/junkie
Our port Before : https://seclist.wordpress.com/2012/02/14/junkiethesniffer-v1-5-0-released/

Advertisements

The Network Diagnostic Tool (NDT) v-3.6.5 released.

 The Network Diagnostic Tool (NDT) is a client/server program that provides network configuration and performance testing to a users desktop or laptop computer. The system is composed of a client program (command line or java applet) and a pair of server programs (a webserver and a testing/analysis engine). Both command line and web-based clients communicate with a Web100-enhanced server to perform these diagnostic functions. Multi-level results allow novice and expert users to view and understand the test results.

 

Hardware Requirements

The NDT system does not place a tremendous set of demands on a host. The question is: can it operate in the environment specified by the network administrator? the primary client is located on a campus with an Ethernet, WiFi, or Fast Ethernet

network connection, then a low-powered server would suffice. If the primary serve Gigabit Ethernet-connected hosts, transcontinental, or international more powerful host will be required.

Minimum requirements for a campus only server are:

•500 MHz Intel or AMD CPU

•64 MB of RAM

•Fast Ethernet

If you can purchase a new or better machine, an optimal server for the future

•2 GHz or better processor

•256 MB of RAM

•Gigabit Ethernet

Disk space is needed for executables and log files, but there is no disk I/O during testing. Thus, any disk capable of holding the basic Linux operating suffice for a basic NDT server.

 

Software Requirements

Web100 enhancements that are needed are:

•Linux kernel

•User library

ther third-party software needed to compile source includes:

•Java SDK

•pcap library

•Client uses Java JRE (beware of versioning issues)

And, of course, the NDT source file – test engine (web100srv) requires root authority.

Installation GuideHow-To Setup your Own NDT Server

 

Download : ndt-3.6.5.tar.gz (1.4 MB)

Find Other version |

Read more in here : http://code.google.com/p/ndt/

Freenet 0.7.5 build 1409 released

What is Freenet? Freenet is free software which lets you publish and obtain information on the Internet without fear of censorship. To achieve this freedom, the network is entirely decentralized and publishers and consumers of information are anonymous. Without anonymity there can never be true freedom of speech, and without decentralization the network would be vulnerable to attack.

Download in here | Read more right here

 

jNetPort – Active monitoring tool and network status display

jNetPort is a complete Java based active monitoring tool and network status display. It includes a graphic user interface for multiple port scanner engines (including Nmap) with multitasking environment (allowing to do multiple scans at the same time), graphic ping tool, traceroute tool with worldwide IP location display, and a complete statistics section which allows to display plots and compare and save results.
NOTE: Jpcap and Nmap required.

 

Download in here | Read More Right here

MaxCannon

MaxCannon is a UDP Denial of Service stress tester with a twist. The tool also allows your computer to because a server for a volunteer botnet where other people with MaxCannon can connect and are under the command of the server operator. The clients that connect to this volunteer botnet can join and leave any time they want.


Commands:The two commands as the server operator are

flood <ip>
connected (shows who is connected)

Features

  • UDP Flood (DoS)
  • UDP Flood (DDoS) With Volunteer Botnet
  • Simple to Use
  • Volunteer Botnet
  • Powerful
  • Simple UI

Download in here | read more right here

Update Ip-Viever v3.0

Version is Version 3.0 :

  • This is a major upgrade and adds support to view data about all the adapters on a system.
  • Most systems will only have 1 or 2 adapters LAN/Wireless but some have Virtual adapters, etc.
  • This upgrade allows for viewing all the ip addresses for all adapters. More information about
  • the adapter has also been added.

A program that allows you to view the ip address of your computer.


Features

  • view ip address (internal and external)
  • view mac address
  • view hostname
  • hide in system tray
  • auto refresh ip data
  • show ip address, mac address, or host name as tool tip if in system tray
  • Current Version is Version 3.0:
  • This is a major upgrade and adds support to view data about all the adapters on a system.
  • Most systems will only have 1 or 2 adapters LAN/Wireless but some have Virtual adapters, etc.
  • This upgrade allows for viewing all the ip addresses for all adapters. More information about
  • the adapter has also been added.

Download in here | Read more right here

Turm – The *nix remote manager

Web-GUI and user-extensible command library for managing applications and services remotely.

The primary goal is to create a system that can manage:
– LXC Containers
– Libvirt virtual networks
– OpenVPN networks
– Reverse proxies for IPv4
– IPv6 networking
– Web-Hosting applications
– Content Management System’s
– Simple configuration commands and routines

The end game is an administrator tool that can manage even a complex cloud-computing-like system as a hybrid virtual and real server farm.

Turm can run from any LAMP system, (Linux Apache MySql PHP), and control any SSH-accessible client. Unix/Linux, Os X, and possibly even Windows via freeSSHd.
Features

  • User/Project Tree model
  • Realtime operations over SSH on the remote systems.
  • MySQL based PHP generated jQuery, jqGrid frontend.
  • Modular, extensible design.

Download in here
read more right here :